1.25" PULL-UP BAR

The 1.25” Pull-Up Bar is a traditional, straight pull-up bar and a great, basic start for your gym. The bar is heavy-duty and made from 4.5mm steel. It is a required component of your power rack build

ROUND SANDWICH J-CUPS 2.0

Round Sandwich J-cups 2.0 feature a super secure “doesn’t move” resting point. Plastic lining protects your bar and the uprights. They feature high-end finishes, such as a laser-cut metallic black REP logo plate with a stainless-steel backing, and they’re laser cut and bent with rounded corners. These cups fit bars with diameters less than 50mm.

FLIP-DOWN SAFETIES

Flip-Down Safeties, made from 11-gauge steel, are versatile and easy to use. Slide them into the upright holes, flip into place, and lock with a pin to keep you safe while lifting. These safeties feature laser-cut numbers, 1” holes compatible with attachments, and are beefy enough to be used as a solid pulling platform.

MULTI-GRIP PULL-UP BAR

The Multi-Grip Pull-Up Bar is great for versatile training. It features a 1.25” standard pull-up bar; 1.25” angled and neutral grips; and a 2" bar. Attach it normally or invert it for a low ceiling. The bar is durable, made from 14-gauge steel. A pull-up bar is a required component to your rack build.

FLAT SANDWICH J-CUPS 2.0

Upgrade your power rack with Flat Sandwich J-cups 2.0. These versatile, heavy-duty cups are taller for easy reracking and feature a larger opening than Standard J-cups, great for oversized, specialty bars. The 2.0 version brings an elevated finish to your power rack, with high-end details like a laser-cut, metallic black REP logo plate with a stainless-steel backing – the reverse of the original design for an extra pop.

GLOBE FRONT MOUNT PULL-UP BAR

The Globe Front Mount Pull-Up Bar provides a variety of exercises with multiple grips, from neutral to close to wide. In addition to 1.3” tubes at different angles, this bar also features small globes (3.1” diameter) and large globes (4” diameter) to hit different muscles and improve your grip. A pull-up bar is a required component to your rack build.

STRAP SAFETIES

Reinforced nylon Strap Safeties are heavy-duty enough to keep you safe while lifting, but much gentler on your barbell than metal. They’re also quiet, easy to install (like a J-cup), and are uniquely adjustable, as the front and back ends can be mounted at different heights.

STANDARD J-CUPS 2.0

Standard J-cups 2.0 are the most cost-effective option. They’re a lower-profile design and are super easy to use; just slide them into the uprights. They feature a protective plastic lining and recessed hardware to protect your barbell. They’re precisely laser-cut and made extra tough.

STRAP SAFETIES 2.0

Reinforced nylon Strap Safeties 2.0 are heavy-duty enough to keep you safe while lifting, but much gentler on your barbell than metal. They’re also quiet, easy to install (like a J-cup), and are uniquely adjustable, as the front and back ends can be mounted at different heights. The patent-pending design secures brackets in place and prevents them from rotating when being pushed laterally. Updated, shorter strap lengths reduce the slack between the uprights. This makes it easier to set the proper height and bar position.

ARES™ - BUILDER

The Ares™ Cable Attachment is a fully integrated, functional trainer and lat pulldown/low row attachment that affixes to your existing PR-4000 or PR-5000 Power Rack. This saves major space, by bringing a ton more versatility and cable exercises inside the rack, will preserving nearly all the original functionality.

ATHENA™ SELECTORIZED SIDE-MOUNT FUNCTIONAL TRAINER

A low-profile, selectorized cable attachment that integrates into the side of your PR-4000 or PR-5000 Power Rack. Get the functionality of a cable machine so you can build your upper body and get in accessory and isolation work, without needing space for a stand-alone unit. Add bands to the integrated band pegs on the base and headplate for added resistance.

ares™ - 2.0 Weight stack upgrade

The option to max out the potential of your Ares™ 2.0. Upgrades the weight stack with an additional 50lbs to each weight stack, making the new total weight 310lbs or 620lbs in total.

WEIGHT STACK UPGRADE (SELECTORIZED ATHENA™ ONLY)

The option to max out the potential of your Athena™ Selectorized Side-Mount Functional Trainer. Upgrades the weight stack with an additional 50lbs, making the new total weight 220lbs.

ARES™ WEIGHT STACK UPGRADE

The option to max out the potential of your Ares™. Upgrades the weight stack with an additional 50lbs to each weight stack, making the new total weight 310lbs or 620lbs in total. There are 4 incremental 2.5lb weights included for micro-adjustments.

SELECTORIZED LAT PULLDOWN & LOW ROW (4000/5000 SERIES)

Selectorized pulley system that brings the functionality of cable movements to your setup. Great for lat pulldowns, low rows, curls, belt squats tricep work, and much more. Add bands to the integrated band pegs for added resistance.

WEIGHT STACK UPGRADE (SELECTORIZED ATHENA™ ONLY)

The option to max out the potential of your Athena Selectorized Side-Mount Functional Trainer. Upgrades the weight stack with an additional 50lbs, making the new total weight 220lbs.

UTILITY SEAT

Bring a ton of versatility to your home gym with the Utility Seat. Attach it to multiple areas of your power rack like the crossmembers, uprights, Flip-Down Safeties, Spotter Arms, and ISO Arms. Create different exercises, such as leg presses, preacher curls, donkey kicks, box squats, box jumps, step-ups, stone loading, or even use it as a spotter platform.

WEIGHT STORAGE HORN SETS

Save space and organize your plates on the weight storage uprights of your existing rack, with the Weight Storage Horn Sets. They can hold up to 12" of plates per horn. That's four 45lb bumpers totaling 180lbs, or seven 45lb irons (Equalizers) totaling 315lbs.

BAND PEGS 2.0

Attach bands to these chrome-plated, solid-steel pegs for added resistance during your lifts. Integrate them with compound lifts, such as squats and deadlifts, to create a variable load, or use them for band work for warm-ups, mobility, and recovery. You can also use the pegs to store bands, chains, attachments (like the Utility Seat), and other gym accessories.

ARES™ WEIGHT STACK UPGRADE

The option to max out the potential of your Ares. Upgrades the weight stack with an additional 50lbs to each weight stack, making the new total weight 310lbs or 620lbs in total. There are 4 incremental 2.5lb weights included for micro-adjustments.

UTILITY SEAT PAD

Upgrade your Utility Seat with REP’s Utility Seat Pad. This pad allows you to add versatility to your Utility Seat, so you can be comfortable performing prone exercises, like seal rows.

WEIGHT HORNS

With REP's Weight Horns, you can conveniently store your weight plates on your rack without a separate storage unit taking up space. Weight Horns are sold in pairs.

FRONT FOOT EXTENSION PAIR

Work safely outside your rack without needing to bolt it down, when you add these to your PR-4000 or PR-5000 Power Rack. They allow you to add Spotter Arms off the front of the rack and have a dedicated setup for bnching and squatting without changing the J-cup or safety height. you can also use them to safely do dips and press exercises outside of the rack. They're compatible with other attachments, such as the Landmine Attachment, Band Pegs, and Utility Horn for the 5000 Series.

ares™ - 2.0 weight stack upgrade

The option to max out the potential of your Ares™ 2.0. Upgrades the weight stack with an additional 50lbs to each weight stack, making the new total weight 310lbs or 620lbs in total.

DROP-IN DIP ATTACHMENT

The Drop-In Dip Attachment is an extra secure, "Double C-cup" design and is quick and easy as J-cups to mount on the uprights. It mounts as two individual components to the left and right uprights, and the two-handle design allows you to do dips in the center of the rack. This also allows you to use the dip attachment with the belt squat for weighted dips.

LANDMINE ATTACHMENT

The Landmine Attachment connects to the outside of the rack’s uprights with the included band peg. This makes it quick and easy to take it on and off. A side mount keeps the attachment out of the way of your work. This attachment is designed to make rotational barbell movements more efficient such as landmine presses, rows, Russian twists, single-arm bent-over rows, and more.

DUAL BARBELL HANGER

The Dual Barbell Hanger easily bolts onto to your rack and has two 35mm cutouts so you can store your barbells vertically. It’s lined with protective plastic and the front has a high lip to hold bars in place. We recommend attaching it to the outside of your rack.

1000 series weight storage

Organize your home gym in an efficient and small footprint by adding a weight storage unit to your PR-1000 or PR-1100 Power Rack. This unit is heavy duty, with the capacity to hold up to 2,000lbs of weight. To protect your plates, the weight horns feature rubber protection on the endcaps and gaskets/stops.

LEG ROLLER

The Leg Roller Attachment quickly connects to your rack uprights and locks in place with a pin. It’s an economical way to add more exercises, such as back extensions, preacher curls, and split squats, and it holds you down during lat pulldowns. We recommend buying two attachments if you want it for lat pulldowns on your 5000 Series rack.

SPOTTER ARMS

These Spotter Arms will keep you safe when pushing your limits, and they can also be used for rack pulls. They feature a steel lip to keep the barbell from rolling off the edge and are heavy-duty, made from steel with a capacity of 1,000lbs. They even have holes that are compatible with various attachments, like the leg roller.

REAR BASE STABILIZER 2.0

Add stability and function to your power rack with the uniquely shaped Rear Base Stabilizer. This removes the need to bolt down your PR-4000 or PR-5000 Power Rack with 41" crossmembers. In addition, use it as a necessary anchor point for the optional Lat Pulldown & Low Row Attachment. The RBS comes in two types: RBS 1.0 and RBS 2.0. The 1.0 mounts to the rear of the uprights and the 2.0 mounts to the inside of the uprights, making it more compatible with future attachments without compromising stability.